The aim of digital interconnection is to match sending and receiving equipment and to minimise high frequency signal loss which can "round off" rising edges of the digital signal - resulting in corrupt data. When impedances don't match, the signal effectively gets reflected in the cable causing corruption and timing errors.

The Digi series are true 110 ohm impedance AES-EBU digital Audio cables, available as single pair installation, microphone and multicore formats. The resistance is reliably consistent, and the low capacitance is due to the special polymer sheath.  Core to core capacitance is < 85pf/m, conductor to screen is <130pf/m.

Note: Use 75 Ohm BNC connectors for SPDIF. Don't mix 50 Ohm and 75 Ohm as this damages the BNC sockets!

WORDCLOCK CABLES - We can now offer wordclock cables, BNC to BNC connector, 75 ohm cable at £8.33 for 2 metre length, and £9.04 for 3 metres.